Computer case Thermaltake Versa H17 black Review

Some pros: Ease of use, plenty of space for cable management, wires do not hang out in the case, but are neatly removed behind the wall. Its cons: No serious deficiencies were identified. The upper dust filter partially covers the blowout, I had to cut it, because a 120 cooler was bought, and there were slots on the sides through which air could circulate into the case, but blowing out of the case was needed.

This is a great example of getting the most bang for your buck. Superior to alternatives at the same price (deep cools and fractal design, for example, do not provide the same value, and when they do, they are often more expensive).

I put together a new assembly with water cooling, figured out how to get the front panel off, drilled holes for better ventilation, and set up all the coolers; now, air is flowing from the back of the case to the front, and the temperature inside the case doesn't go up even when it's under 100% load; the CBO radiator does a fantastic job of keeping things cool.

If an ATX could fit in it, I would install a second system in it after I built one for an architectural office. In general, a highly effective model at a reasonable cost. Snobby architects instantly remarked that the design seems respectable.

Some pros: Strong metal gives the impression that you are not holding a tin can but rather a solid body from the moment you take it in your hands. By the way, the design is also quite precise and succinct, and I appreciate the following Cons: Despite the claim that it can only accommodate matx boards, this case is not at all small in any way. Although it appears to be wider than my Zalman Z9 Plus, the width of the Thermaltake case is comparable to that of my Zalman.

For your money - a great option! For those who want to build a quiet computer - look at cases with a horizontal mat. fees. This will allow you to buy a heavy tower and install it without a fan, only with a pair of hull units for blowing in and out. With its pros: * strong. * Separate compartment for power supply and hard drives. * place for cable management. Different cons: A little booming - I decided by gluing the vibroplast on the side walls and the top panel. Issue price - 250. No dust…

Unrivaled among products with similar prices. Has pros: PC case that is extremely well designed, STRONG, and simple to put together. Efficiency and effectiveness. dust filters that may be removed, and the top has magnets. Having the capacity to conceal all of the wires behind the wall. Below are some downsides: It would be good to have a transparent window, but ultimately, it comes down to personal desire and cost.

With its pros: Compact. Neat, minimalist design. In my opinion, it looks more expensive than its price (I took it for 2200). Quiet. Easy to assemble. Got cons: It would be very cool if there was a possibility of installing a fan on the side. There is no dust collector on the front panel (the problem is solved).

I took it without looking, I relied on the brand. At the time of purchase, the price was 3700. I immediately realized that even a cold system would not work normally in this case. A blind front panel, with narrow slots on the sides, that is, there is simply nowhere for the front fans to take air. And there is room for 3 120 mm fans. For what? grind the air inside the case? Some consider a small cut in the front cover from the bottom to be an air intake. People, this is a cut to remove the front

Has pros: Modern case, inexpensive, but of sufficient quality. It looks very dignified, the metal is good, everything is strong and comfortable. The disadvantages listed below are not critical. Cons: I had to drill one hole for the mATX board and cut the thread, otherwise it would hang in the air. I did not understand a little the idea of ​​​​a magnetic dust filter on the fan at the top - logically, it should work for blowing. But the air intake in front is made so-so - it is inconvenient to cl

Processor: Intel Core i5-12600K OEM Motherboard: GIGABYTE Z690M DS3H DDR4 CPU cooler: DEEPCOOL GAMMAXX 400 EX [LGA1700] [DP-MCH4-GMX400EX] Everything fit with a margin! Cooling is super (on the built-in GPU)! 3 pcs. in use (see above and below): - CPU: Intel Core i3-10100; MBD: Asus PRIME H510M-K - CPU: Intel Core i3-10100T; MBD: Gigabyte GA-B560M DS3H V2

Some pros: Very convenient and compact, the button is in the right place for me, like the windows with bars. You can put a big video card. Looks very cool. Mounting disks on rubber bands. Cons below: It was difficult to fasten the video card with something, the screws did not really match.