Header banner
Revain logoHome Page
aerocool astro 12cm remote control logo

Aerocool Astro 12CM Remote Control Review

5

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.3
🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(4)
img 1 attached to Aerocool Astro 12CM Remote Control
img 2 attached to Aerocool Astro 12CM Remote Control
img 3 attached to Aerocool Astro 12CM Remote Control
img 4 attached to Aerocool Astro 12CM Remote Control

Photos by authors

(14)
img 5 attached to Aerocool Astro 12CM Remote Control
img 6 attached to Aerocool Astro 12CM Remote Control
img 7 attached to Aerocool Astro 12CM Remote Control
img 8 attached to Aerocool Astro 12CM Remote Control

Details

Item Dimensions LxWxH4.72 x 4.72 x 0.98 inches
BrandAeroCool
Power Connector Type6-Pin
Voltage12 Volts
Wattage50 watts
Cooling MethodFan
See 2 more

Description of Aerocool Astro 12CM Remote Control

120 mm fan with RGB LED lighting. The LED lighting design omni rgb adds an extra touch to your equipment. Total ventilation curved blades and anti-vibration pads more than 60000 hours lifespan. Anti-vibration pads to absorb and reduce movement generated by fan rotation.

Reviews

Global ratings 5
  • 5
    2
  • 4
    2
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

A reliable product, quality is acceptable.

Excellent turntables in terms of quality and appearance. Not without cons, but ideal things do not happen. Additional piece turntables got into the hub without any problems, but there are jambs (see disadvantages)

Pros
  • Shine brightly, evenly and in all directions Understated no-frills design No connectivity issues Included are all the necessary types of fastening (clamps, screws, self-adhesive Velcro for the hub) Decent airflow Low noise
Cons
  • Remote sometimes glitches Versions from the kit and the piece do not match in some colors (see photo) More than three pieces can make significantly more noise. The winding is poorly covered, it may become dusty.

Revainrating 3 out of 5

Not perfect quality, some small defect.

Owning this beautiful three-fan system was marred by a couple of unpleasant moments: Periodically (rarely) vibration occurred on vertically mounted fans, disappeared if you lightly tapped the valve rotor with your finger. Adjusting the tightening of the screws did not cure. I threw the system into another case and there was a problem with pulling out the fan connectors from the controller. The "rocker" of the latches turned out to be insufficient to disengage from the tooth inside the…

Pros
  • They glow beautifully and look stylish. Synchronized with the motherboard. Velcro controller. Remote control
Cons
  • Resonance vibration. Latches on the fan power connectors.

Revainrating 5 out of 5

Best thing I have ever used, highly recommended!

If I find the reason for the lack of adjustment through the mother, I will supplement the review. With its pros: — Beautiful and stylish — ARGB - Characteristics - Resource - Controller included - Remote speed control - Relative noiselessness Different cons: - 6 pin - I don’t have speed control on a 4-pin connector - I hope it’s not a marriage

Revainrating 4 out of 5

It was a reasonable purchase, I will order more.

The Amazon carried out an examination very quickly and issued an ACT in less than a day. The exchange was fast and no questions asked. I ended up buying another set of fans from TermalTake. Everything is reinforced concrete, as always. I'm not going to experiment anymore. But the experience was positive, in general, probably due to the work of Amazon Technopoint Hong Kong employees and their Service Center. Nice guys!

Pros
  • Tons of effects and settings, that's exactly what I wanted to put in my new transparent case. There is a remote control, you can change the settings of coolers without additional. software on the motherboard.
Cons
  • Unfortunately, both sets were defective. The cooler switch died 10 minutes later. The backlight stopped working and the speed of rotation of the revolutions was regulated. I opened the case of the controller and saw that the tracks were soldered in places by someone manually. Apparently, these hubs were rejected at the factory and repaired there. Then repackaged and sold complete with good fans. This is a common repair practice, but in this case, apparently a quick check on the line within <1 minute showed no defect and the defect was sent for sale. My hubs died almost immediately after being turned on, on a good power supply, double-checked on two other computers, it still didn’t work.