Header banner
Revain logoHome Page
arctic p12 pwm pst pack logo

ARCTIC P12 PWM PST Pack Review

5

·

Excellent

Revainrating 5 out of 5  
Rating 
5.0
🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(4)
img 1 attached to ARCTIC P12 PWM PST Pack
img 2 attached to ARCTIC P12 PWM PST Pack
img 3 attached to ARCTIC P12 PWM PST Pack
img 4 attached to ARCTIC P12 PWM PST Pack

Photos by authors

(5)
img 5 attached to ARCTIC P12 PWM PST Pack
img 6 attached to ARCTIC P12 PWM PST Pack
img 7 attached to ARCTIC P12 PWM PST Pack
img 8 attached to ARCTIC P12 PWM PST Pack

Description of ARCTIC P12 PWM PST Pack

ILLUMINAZIONE ANALOGICA RGB: I 12 LED RGB disposti lungo della ventola e il rotore trasparente con il suo design chiuso, forniscono un'illuminazione uniforme e completa. FACILE DA COMBINARE: Sia il cavo della ventola che il cavo RGB hanno uno Y- splitter integrato, rendendo ancora più facile la possibilità di aggiungere altre ventole. OTTIMIZZATO PER LA PRESSIONE STATICA: Grazie all'alta pressione statica, il ventilatore garantisce un raffreddamento efficiente anche in caso di alta resistenza dell'aria. Adatto per l'uso su dissipatori e radiatori. 0-2000 RPM: la velocità della ventola può essere regolata fino al minimo tramite PWM. Questo permette un funzionamento silenzioso in IDLE e allo stesso tempo garantisce le massime prestazioni quando è necessario. SPECIFICHE: Pacco da 3, Velocità della ventola: 0-2000 rpm, Flusso d'aria: 48.8 CFM/82.91 m3/h, Pressione statica: 1.85 mmH2O, Livello di rumore: 0.3 Sone, Connettore ventola: 4-pin, Connettore LED: 4-pin.

Reviews

Global ratings 5
  • 5
    5
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

The best thing I've ever used, a great item for everyone!

: after a year of use, I can say that I am satisfied with the purchase. Review ated. True, it confuses that in the specification this fan is not provided for blowing from the bottom up, as it was installed in the PSU. Only top to bottom or sideways.

Pros
  • Installed in power supply. Connected to the motherboard in Normal mode (constant ~880 rpm). No ball bearings, no vibration, no hum, no air movement. Only if the ear is brought closer to the block, you can hear a slight movement of air. For my i3 with a low TDP, the fan pulls air through the case well: the hard drives, the motherboard, and the CPU remain cold.
Cons
  • No.

Revainrating 5 out of 5

Full compliance with the manufacturers assurances, high quality.

I bought two fans to try out and immediately fell in love with them. At high speeds I can not hear the fan, only the air flow becomes stronger. It `s Magic) I installed it on silicone mounts in the case, do not even redo it in the future. Some pros: Airflow direction flow force No noise even at maximum speed Color) Cons below: If you stick an RBG backlight along the contour, it will be absolutely great, although everything is fine without RGB. No silicone mounts

Revainrating 5 out of 5

I didn³'t expect the quality to be this good.

Check input filters. I bought everyone to replace the standard turntables, including the power supply in a new PC, which I did not assemble myself for the first time. Afraid - not enough strength - no health. Cursed this decision. Now I'm fixing it. Faced such a problem. Does not pull the input, there is no movement at all air. Raised through BIOS to full power.-0-. There are no miracles in aerodynamics. He took off the front cover again and saw a miracle filter. A piece of dyed dense foam…

Pros
  • All.
Cons
  • Poor comments about ball bearing turntables being noisy. Illiteracy. For 1000r they make noise, but for 200r they don't.

Revainrating 5 out of 5

Perfect product for any user!

Pros: Quiet, PST - adapter included; you can connect the fans "garland". Different cons: The wires are thin; if a lot of fans are connected in a row, they can get warm.

Revainrating 5 out of 5

I do not cease to rejoice at the purchase, a very good deal!

I bought this valve as a replacement for the standard non-adjustable one, which turned 1800 rpm. Bought a couple. I put one on the tower, the second in the business center as a replacement for the old noisy one. Now this model in stock is spinning at the level of 950-980rpm. When heated, I saw 1300-1350 rpm. At the same time it is absolutely silent. The model looks great, the only thing that catches your eye is a thin power wire. But this is not the main thing, I put the fan on and forgot about

Pros
  • Price quality.
Cons
  • No